http://reefkeeping.com/issues/2004-06/rhf/index.htm
In order to provide a standard for refractometers, a solution whose refractive index is similar to normal seawater is required. Seawater with S= 35 has a refractive index of 1.3394.1 Likewise, the refractive index of different sodium chloride solutions can be found in the scientific literature. My CRC Handbook of Chemistry and Physics (57th Edition, Page D-252)4 has such a table. That table has entries for 3.6 and 3.7 weight percent solutions of sodium chloride that span the value for normal seawater. Interpolating between these data points suggests that
a solution of 3.65 weight percent sodium chloride has the same refractive index as S=35 seawater, and can be used as an appropriate standard (Table 2).
View attachment 11772
This 3.65 weight percent sodium chloride solution can be made by dissolving 3.65 grams of sodium chloride in 96.35 grams (mL) of purified fresh water. That amount roughly corresponds to ¼ cup (73.1 g) of Morton's Iodized Salt dissolved into 2 liters (2000 g) of water (giving very slightly more than 2 L of total volume).
For a rougher measurement in the absence of an accurate water volume or weight measurement:
1. Measure ¼ cup of Morton's Iodized Salt (about 73.1 g)
2. Add 1 teaspoon of salt (making about 79.3 g total salt)
3. Measure the full volume of a plastic 2-L Coke or Diet Coke bottle filled with purified fresh water (about 2104.4 g)
4. Dissolve the total salt (79.3 g) in the total water volume (2104 g) to make an approximately 3.65 weight percent solution of NaCl. The volume of this solution will be slightly larger than the Coke bottle, so dissolve it in another container."