If you have ever wanted to set up a BIG tank, but didn't have $20,000+ to get it done, this is your time.
Due to a pending move, out of state, my roommate has decided to go ahead and sell his aquarium, and even I was surprised by his selling price. The tank details are as follows:
Marineland 300g DD tank - 72"x36"x27"
Custom built steel stand. the stand is powder coated and is built like a tank, it weighs almost 1000 pounds.
90 gallon custom sump
Reef Octopus Regal 300SSS Protein Skimmer
Jebao DCT-15000 return
Mag 24 (used as a backup pump, too loud for daily use)
Reef Octopus Biopellet reactor
Reef Octopus GFO reactor
Tunze ATO with 55 gallon aquarium for reservoir
2 x Jebao RW-20 wave makers with JBWave controller
Milwaukee pH controller
800W titanium heater with Ranco temp controller
Jebao 4 pump dosing pump
3 x 44 gallon Brute cans for water changes (with wheels)
Mag 7 pump (used for mixing saltwater
Jebao DCT-6000 (used for mixing saltwater)
Jebao DCT-12000 (used with the biopellet and GFO reactors)
300 GPD RODI unit with BRS dual DI canisters and booster pump
Custom LED Light
The light was custom welded , designed, and wired by us. It has 456 Cree LED's including:
Royal Blue
Cool White
Cyan
Red
Blue (not currently working)
390nm UV (not currently working)
3 x StormX Controllers (one for each bank of LED's)
Par meter from BRS (plugs into computer)
The light alone cost $4,000 to make. In all more than $20,000 has been invested into the equipment. Jeremy is asking $5,000 for the entire system. He is not looking to part it out, so please don't ask. You all know what this setup cost, so please don't try to lowball, he needs to sell but is not looking to get "raked over the coals" any more than he already is.
Please feel free to ask me any questions, I will respond ASAP. There are still fish in the tank, so it can't go until they are all gone.
Due to a pending move, out of state, my roommate has decided to go ahead and sell his aquarium, and even I was surprised by his selling price. The tank details are as follows:
Marineland 300g DD tank - 72"x36"x27"
Custom built steel stand. the stand is powder coated and is built like a tank, it weighs almost 1000 pounds.
90 gallon custom sump
Reef Octopus Regal 300SSS Protein Skimmer
Jebao DCT-15000 return
Mag 24 (used as a backup pump, too loud for daily use)
Reef Octopus Biopellet reactor
Reef Octopus GFO reactor
Tunze ATO with 55 gallon aquarium for reservoir
2 x Jebao RW-20 wave makers with JBWave controller
Milwaukee pH controller
800W titanium heater with Ranco temp controller
Jebao 4 pump dosing pump
3 x 44 gallon Brute cans for water changes (with wheels)
Mag 7 pump (used for mixing saltwater
Jebao DCT-6000 (used for mixing saltwater)
Jebao DCT-12000 (used with the biopellet and GFO reactors)
300 GPD RODI unit with BRS dual DI canisters and booster pump
Custom LED Light
The light was custom welded , designed, and wired by us. It has 456 Cree LED's including:
Royal Blue
Cool White
Cyan
Red
Blue (not currently working)
390nm UV (not currently working)
3 x StormX Controllers (one for each bank of LED's)
Par meter from BRS (plugs into computer)
The light alone cost $4,000 to make. In all more than $20,000 has been invested into the equipment. Jeremy is asking $5,000 for the entire system. He is not looking to part it out, so please don't ask. You all know what this setup cost, so please don't try to lowball, he needs to sell but is not looking to get "raked over the coals" any more than he already is.
Please feel free to ask me any questions, I will respond ASAP. There are still fish in the tank, so it can't go until they are all gone.
