Glass cutting shops

[MuralReef]

Anybody know a good reasonably priced shop to get a piece of glass to use as the center brace on the 180? Prefer Denver or Aurora.

 

[Walter White]

how thick? you could probably do it yourself its not very hard.

Otherwise Toledo glass is good but unfortunately in Boulder. If you don't find another place you could order it from toledo and I can could pick it up for you I work about 3 blocks away from their shop.

 

[MuralReef]

Needs to 3/8" and I'd rather have it done so the edges a smooth not sharp.

 

[Walter White]

Smoothing the edges is not a problem just takes some wet-sand paper and a little elbow grease. However 3/8" is too thick to do yourself. It would be risky

 

[MuralReef]

I'll see if anyone recommends a shop down here if they don't then I'll give Toledo a call. A drive to Boulder isn't too bad.

 

[Walter White]

I'll see if anyone recommends a shop down here if they don't then I'll give Toledo a call. A drive to Boulder isn't too bad.

Well like I said I could pick it up and you could swing by my place or I could meet you somewhere.

 

[rplank]

Anybody know a good reasonably priced shop to get a piece of glass to use as the center brace on the 180? Prefer Denver or Aurora.

Mile High Glass in Denver. Friend of mine owns it. 3800 Quitman in Denver. His name is Scott. Tell him Randy sent you and you are a coral nerd. He will give you crap but he's a heck of a great guy.

 

[ayaws]

If it's any closer, Ken Caryl glass off S. Santa Fe is really good. They've done all my drilling work. Came recommended from Aquatic Art.

 

[robert.talarico]

Edge water glass

 

[ayaws]

+1 on Edgewater. They do a bunch of big stuff (showers and such) for my interior designer wife.