Well my wife and I are moving in August to a new place and don't have the room in our new place for our tank. I would prefer someone just take the whole setup and not have to part it out. See my other post for the live stock. I cant part out the tank until I sell the live stock but I will take deposits to hold the equipment. please make offers on this stuff, just looking at receipts its easily over a few grand worth of stuff. I will make a smoking deal if you buy everything at one time (including livestock).
$200-the setup is a Deep Sea Aquatics pro 65 tank -it is reef ready 1 drain and 2 returns, dimensions - Length: 36"- Width: 20"- Height: 21" 65 gallons if that is not clear. one scratch on the front the should be buffable but is hardly noticable and another that got scratched by a drill bit. The sides and back are coated with plastidipped
$100-20 gallon long setup with baffles in an over-under-over open space then over-under to the return pump
$15 each there are 2 hydor circ pumps
$75 sicce syncra 4.0 return pump
$200-Vertex omega 150 protien skimmer -the ORP port broke off on the pump inlet. I had vertex send me a new redesigned impeller because the original one broke due to a bad design.
$500-Neptune Apex system with PH and temp sensors - two EB8's, ALD with 2 modules and an input/output breakout box(unused)
$15 each three BRS dosing pumps - older models
$400 2x AI hydra lights with wireless controller one is about 8 months newer than the other.
$100-Tunze ATO
$25- cobalt neotherm 100watt, $30 cobalt neotherm 150 watt
$45- BRS deluxe reactor with mj1200
I have a bunch of other misc equipment and a 20 gallon QT setup that has had copper in it!
i have two unopened boxes of Fritz pro salt
I have an AWI setup for RODI but we also use it for our household water so i might hold on to that unless the price is right, i have a bunch of DI resin for it as well.
you can contact me at (720)two61-4one45 or at paulschroe (at) gmail.com
thanks,
Paul
$200-the setup is a Deep Sea Aquatics pro 65 tank -it is reef ready 1 drain and 2 returns, dimensions - Length: 36"- Width: 20"- Height: 21" 65 gallons if that is not clear. one scratch on the front the should be buffable but is hardly noticable and another that got scratched by a drill bit. The sides and back are coated with plastidipped
$100-20 gallon long setup with baffles in an over-under-over open space then over-under to the return pump
$15 each there are 2 hydor circ pumps
$75 sicce syncra 4.0 return pump
$200-Vertex omega 150 protien skimmer -the ORP port broke off on the pump inlet. I had vertex send me a new redesigned impeller because the original one broke due to a bad design.
$500-Neptune Apex system with PH and temp sensors - two EB8's, ALD with 2 modules and an input/output breakout box(unused)
$15 each three BRS dosing pumps - older models
$400 2x AI hydra lights with wireless controller one is about 8 months newer than the other.
$100-Tunze ATO
$25- cobalt neotherm 100watt, $30 cobalt neotherm 150 watt
$45- BRS deluxe reactor with mj1200
I have a bunch of other misc equipment and a 20 gallon QT setup that has had copper in it!
i have two unopened boxes of Fritz pro salt
I have an AWI setup for RODI but we also use it for our household water so i might hold on to that unless the price is right, i have a bunch of DI resin for it as well.
you can contact me at (720)two61-4one45 or at paulschroe (at) gmail.com
thanks,
Paul
Last edited by a moderator:
