Need help again

CRW Reef

CRW Reef

Blue Whale
M.A.S.C Club Member
ex-officio
#2
#2
Have you tried calling Elite? I'm pretty certain that they are the manufacturers or owners or investors (could be very wrong here too) of SWC Skimmers, one would think they could help you out for sure!
 
Last edited by a moderator:
sethsolomon

sethsolomon

Hammerhead Shark
M.A.S.C Club Member
#9
#9
AllysonP;348292 said:
would this impeller work in the pump i have
http://www.ebay.com/itm/NIB-Impelle...er-/190947762115?_trksid=p2141725.m3641.l6368
Click to expand...
sethsolomon;348293 said:
Doing some digging on the size.
Click to expand...

I think the Atman 2000 should fit. I was unable to find any lengths for the ceramic shaft so that would be a determining factor. I personally would suggest just picking up an atman 2500 or atman 3000 and just replace the whole pump. I have been using an atman 2500 on my nac 6 on my 104g and an atman 4000 on my nac 6 in my 120g. The 2500 has been running 2.5 years no problems at all and the 4000 for 3.5 years + how ever long the guy who had it before me had it.

also, atman pumps are one the easiest pump to get parts for.
 
Last edited by a moderator:
sethsolomon

sethsolomon

Hammerhead Shark
M.A.S.C Club Member
#10
#10
did even more digging and that pump has been discontinued for the past 6 years. The only chance of finding an exact match is contacting SWC directly.
 
sethsolomon

sethsolomon

Hammerhead Shark
M.A.S.C Club Member
#12
#12
Well if you want to come up to Fort Collins I can pull apart my nac6 with the AT 2500 and we can see if the prop fits. Or its time to frankenskimmer it up. 2x atman 2000's would be pretty rad on that skimmer body if you feel like modding it. But a single atman 2500 or 3000 should do the trick.
 
You must log in or register to reply here.
Top