need help with Rodi get a free bonsai frag
- Thread starter High Plains Reefer
- Start date
A couple of things to make sure you have correct when modifying:
1. make sure you have a check valve of some sort on your purified water line - http://www.bulkreefsupply.com/mur-lok-inline-check-valve-1-4-x-1-4-push-connect.html * edited - there could be a check valve inside an elbow coming out of membrane instead http://www.bulkreefsupply.com/mur-lok-elbow-check-valve-1-8-male-npt-x-1-4-push-connect.html
2. make sure you have the right sized flow restrictor (must match your membrane gph) on your discharge line -http://www.bulkreefsupply.com/mur-lok-inline-check-valve-1-4-x-1-4-push-connect.html
3. make sure there is no build up on the float valve itself keeping a tight seal from being formed once the valve closes. If enough pressure isnt built up against the ASOV it wont shut down
[video=youtube;ssa6njb5nV4]https://www.youtube.com/watch?v=ssa6njb5nV4[/video]
1. make sure you have a check valve of some sort on your purified water line - http://www.bulkreefsupply.com/mur-lok-inline-check-valve-1-4-x-1-4-push-connect.html * edited - there could be a check valve inside an elbow coming out of membrane instead http://www.bulkreefsupply.com/mur-lok-elbow-check-valve-1-8-male-npt-x-1-4-push-connect.html
2. make sure you have the right sized flow restrictor (must match your membrane gph) on your discharge line -http://www.bulkreefsupply.com/mur-lok-inline-check-valve-1-4-x-1-4-push-connect.html
3. make sure there is no build up on the float valve itself keeping a tight seal from being formed once the valve closes. If enough pressure isnt built up against the ASOV it wont shut down
[video=youtube;ssa6njb5nV4]https://www.youtube.com/watch?v=ssa6njb5nV4[/video]
Last edited by a moderator:
