Need to have my aquarium cleaned thoroughly. I have an acrylic 10' x 3' x 3' three sided viewable, so there is at least 69 square feet of surface area to clean. It is acrylic, so the only safe way to remove the coralline and junk on the surface is with a Kent acrylic safe scraper and Dobie Pads.
This job will include:
1). Cleaning all three faces of acrylic
2). Cleaning four MP60 pumps
3). Cleaning skimmer
4). Cleaning sump (removing detritus from bottom of sump and frag tank).
4). Cleaning frag tank
5). Helping to arrange some of the rock work (had a rock fall and this will need to be re-scaped).
I'm thinking this job is in the 8 -12 total hour range. Scraping coralline off the inside of the tank is a difficult task and care needs to be taken to minimize scratching!
PM me with interest and experience level.
Thanks.
This job will include:
1). Cleaning all three faces of acrylic
2). Cleaning four MP60 pumps
3). Cleaning skimmer
4). Cleaning sump (removing detritus from bottom of sump and frag tank).
4). Cleaning frag tank
5). Helping to arrange some of the rock work (had a rock fall and this will need to be re-scaped).
I'm thinking this job is in the 8 -12 total hour range. Scraping coralline off the inside of the tank is a difficult task and care needs to be taken to minimize scratching!
PM me with interest and experience level.
Thanks.
