So I've had the Jabo WP40 installed a few days and I like the controler features of it. I have it plugged into an Apex outlet, and here is my programing:
Fallback ON
Set ON
If Time 21:00 to 09:00 Then OFF (my other pumps have a night mode in the profiles. I took out the light sensor in the WP40 controler since it's too sensitive for my lighting conditions and shuts down at about 7pm)
If FeedA 005 Then OFF (so I don't have to push more than one feed button)
If Outlet v_OVERFLOW!! = ON Then OFF
I was going to try and work this pump into my profiles, but think at this point I'll leave it as is.
I've been playing with the modes, and like the W2. Else is annoying with the whining noise. Read they get quieter with a few weeks of use; not much louder than my Tunze 6095's but just a higher pitch - so it's something I'm not use to.
Fallback ON
Set ON
If Time 21:00 to 09:00 Then OFF (my other pumps have a night mode in the profiles. I took out the light sensor in the WP40 controler since it's too sensitive for my lighting conditions and shuts down at about 7pm)
If FeedA 005 Then OFF (so I don't have to push more than one feed button)
If Outlet v_OVERFLOW!! = ON Then OFF
I was going to try and work this pump into my profiles, but think at this point I'll leave it as is.
I've been playing with the modes, and like the W2. Else is annoying with the whining noise. Read they get quieter with a few weeks of use; not much louder than my Tunze 6095's but just a higher pitch - so it's something I'm not use to.