I have a very old Apex Classic (before it was classic) and 2 old EB8s. The amp readout on one of my EB8s has gone haywire. It used to be very consistent - jumping from a base level of ~2.5 amps to ~4.5 amps as the T5s switched on and off, but a week ago a small anomaly quickly turned into erratic readings between 3 and 5 amps with no rhyme or reason. I shut off all the outlets one by one to see if it was connected to a particular outlet or piece of equipment and nothing stood out. Anticipating a failure, I moved the return pump to the other EB8, and ordered a new EB8 from BRS, but in the meantime, I'm wondering if any of you have seen this before or have any ideas. I did some googling but haven't found anyone with similar problems.