Hey all!
Who is it that makes all the nice frag tanks I see posted up here?
I am starting the first stage of my next tank and need to get an idea of how much this will cost...probably won't be able to actually pull the trigger on this for about 30 days, but I ned to start getting an idea of what this might cost so I can put the money away.
What I need is effectively a large triangular frag tank. By large I mean an isocolese triangle 72" across the hypotenuse, and 10-11 inches tall.
It needs NO overflows or drilling...I will do all that myself--and ONLY the front viewing surface needs to be clear--the rest can be whatever colors. Corners can be rounded or sharp--whichever is easiest--but prefer sharp--they will be covered by wood trim in the final build.
Another catch...the *actual* tank that this is meant to mimic is going to be 27" tall...so whatever thickness of acrylic would be used to make a 27" tall tank--THAT's what I need this made out of. Top needs to be braced 3-4 inches around the edges, but NOT glued on--I will affix the top when needed.
The purpose of this tank will EVENTUALLY be as a big frag tank...but before that, it's going to be used as a test bed for my flow and rockwork setup in prep for building the main tank.
Who out there can build this for me?
Thanks!
Dave
Who is it that makes all the nice frag tanks I see posted up here?
I am starting the first stage of my next tank and need to get an idea of how much this will cost...probably won't be able to actually pull the trigger on this for about 30 days, but I ned to start getting an idea of what this might cost so I can put the money away.
What I need is effectively a large triangular frag tank. By large I mean an isocolese triangle 72" across the hypotenuse, and 10-11 inches tall.
It needs NO overflows or drilling...I will do all that myself--and ONLY the front viewing surface needs to be clear--the rest can be whatever colors. Corners can be rounded or sharp--whichever is easiest--but prefer sharp--they will be covered by wood trim in the final build.
Another catch...the *actual* tank that this is meant to mimic is going to be 27" tall...so whatever thickness of acrylic would be used to make a 27" tall tank--THAT's what I need this made out of. Top needs to be braced 3-4 inches around the edges, but NOT glued on--I will affix the top when needed.
The purpose of this tank will EVENTUALLY be as a big frag tank...but before that, it's going to be used as a test bed for my flow and rockwork setup in prep for building the main tank.
Who out there can build this for me?
Thanks!
Dave
