The DR.'s 215 build!!! Finally... :/

jda123

Dolphin
M.A.S.C Club Member
Dr.HarlemTutu;249354 said:
so, anyone know how much water can drain from a 1" pipe?
'roundabout 450 with a few elbows and some slime inside. A brand new one cannot drain a Mag 7 IME - I had to put a ball valve on it. You can get more, but don't count on it - 600 is about right when new and if it was a straight fall. Don't under estimate how sponges and other nasty junk can slow down a pipe - the stuff that grows inside of your skimmer will grow in the pipes.

If you go with a single overflow, over drill that think to take a 1.5" drain. I have a bit if you want to borrow it.
 

Dr.DiSilicate

Administrator
Staff member
M.A.S.C Club Member
M.A.S.C. B.O.D.
MASC Vice-President
The DR.'s 215 build!!! Finally... :/

MuralReef;249362 said:
Which glass holes?
Maybe the 1500 but that may not cut it. I've got an 1800 Gph pump. Even with head loss etc. I may need more. Not sure what to do.

May just do a bean animal.


Sent from my iPhone using Tapatalk
 

Dr.DiSilicate

Administrator
Staff member
M.A.S.C Club Member
M.A.S.C. B.O.D.
MASC Vice-President
The DR.'s 215 build!!! Finally... :/

Andrew_bram;249407 said:
Are you going to build a manifold for any reactors
Yea, I am but not going to use it initially. I may use it for some extra flow for a frag section in the sump as well as a desperate mangrove tank.

So, how much flow are those two or three things going to take plus head loss, and how much h2o can I shove through a 1" pipe. A full siphon can do a bit more than a Durso. Just not sure if it'll cut it.


Sent from my iPhone using Tapatalk
 

FinsUp

According to my watch, the time is now.
M.A.S.C Club Member
Dr.HarlemTutu;249409 said:
Yea, I am but not going to use it initially. I may use it for some extra flow for a frag section in the sump as well as a desperate mangrove tank.

So, how much flow are those two or three things going to take plus head loss, and how much h2o can I shove through a 1" pipe. A full siphon can do a bit more than a Durso. Just not sure if it'll cut it.


Sent from my iPhone using Tapatalk
Are you saying you think you should get a bigger pipe?
 

FinsUp

According to my watch, the time is now.
M.A.S.C Club Member
:rofl:
So why are you stuck with just a 1" pipe? What's stopping you from going for a 1.5" pipe?
 

Andrew_bram

Tiger Shark
M.A.S.C Club Member
The DR.'s 215 build!!! Finally... :/

Well if you do open a valve I think your flow would dramatically be affected. That is just gut feeling. I may try and plump in my pellet reactor today I can let you know if I see I large loss.
 

Dr.DiSilicate

Administrator
Staff member
M.A.S.C Club Member
M.A.S.C. B.O.D.
MASC Vice-President
CindyL;249416 said:
:rofl:
So why are you stuck with just a 1" pipe? What's stopping you from going for a 1.5" pipe?
I don't think I can re-drill the bottom. That's why I'm thinking of doing the coast to coast bean animal. I can stick in whatever pipe I want then. This is all because you like the peninsula! YOUR FAULT
 

Dr.DiSilicate

Administrator
Staff member
M.A.S.C Club Member
M.A.S.C. B.O.D.
MASC Vice-President
The DR.'s 215 build!!! Finally... :/

Ok. Not doing the peninsula. Moved around the house with the wife yesterday. Put the tank in living room, now you can see it when you come in the front door. Also, I can do a basement sump if I want!

Going to weld a light rack today. Hopefully move tank in this afternoon.


Sent from my iPhone using Tapatalk
 

Dr.DiSilicate

Administrator
Staff member
M.A.S.C Club Member
M.A.S.C. B.O.D.
MASC Vice-President
The DR.'s 215 build!!! Finally... :/

Haddonisreef;249612 said:
So how are u going to attach the skin to he stand? I don't see any sort of tabs
Magnets to the frame.


Sent from my iPhone using Tapatalk
 

Dr.DiSilicate

Administrator
Staff member
M.A.S.C Club Member
M.A.S.C. B.O.D.
MASC Vice-President
The DR.'s 215 build!!! Finally... :/

greeneyedgirl;249623 said:
Don't forget to wear a long sleeve shirt or is it leather
Haha wouldn't make that mistake twice.!


Sent from my iPhone using Tapatalk
 
Top